Your location：
Product introduction
YGM410 was a product that could show the temperature and humidity according to the service conditions of the clean factory. It was made of ABS plastic plate and had the function of sound and light alarm. It could be installed to the wall with the 86 connection box. The product could show 2 factors of temperature and humidity at the same time. The products had the advantages of high precision, stable performance, high reliability, and easy to install.
It was widely used in clean workshop, biological medicine, food industry, laboratory and other clean space areas.
Technical index
The display range of the temperature: -99 to +999 degrees centigrade (the display resolution is 0.1; the range can be set by pressing the button within the display range, such as setting the range to 0~100 degrees centigrade)
The display range of the humidity: 0 to 100%RH (the display resolution is 0.1)
The measurement precision: 0.2%FS
Signal input: current input: 4 to 20mA
The input type of the power was 0 to 10V
Signal out: current out: 4 to 20mA, electric load no more than 500
The power output mode was 0 to 10V, and the electric load was more than 10K
(Note: when choosing the type, please pay attention to: first of all, the input signals of both sides should be the same. Both of them are 4 to 20mA, or both of them are 0 to 10V. Second, the signals of both sides must be the same. For example, if the input of both sides is 4 to 20mA, then the output must also be 4 to 20mA)
Response time: T90 no more than 10ms
Power supply: 20~28VDC
Degree of protection: IP5X
Working environment: temperature: -20 to +50 ° C, humidity: 0 to 85%RH
The storage environment: temperature: -20 to +60 degrees, humidity: 0 to 85%RH
The layout:
结构图（单位：mm）
Model selection form
Basic unit YGM410-
1 standard products 1
Customized x
2 (temperature, humidity) input (temperature, humidity) and output 4 to 20mA 01
0 to 10V 02
Note: when you choose a customized one, some of the technical data will not be the same as the original one. Please note it when you order.
It explained: 1. the temperature and humidity should be the same. Either 4 to 20mA, or 0 to 10V;
2. the signals of both sides must be the same. For example, if the two-way signal input was 4 to 20mA, then the output must be 4 to 20mA.
Order guide
YGM410-101
Standard products
(temperature, humidity) input (temperature, humidity) and output 4 to 20mA
It is stated that the company will continuously reform the products. If there is any change in the design or the standard, I reserve the right not to inform in advance.
YGM410 was a product that could show the temperature and humidity according to the service conditions of the clean factory. It was made of ABS plastic plate and had the function of sound and light alarm. It could be installed to the wall with the 86 connection box. The product could show 2 factors of temperature and humidity at the same time. The products had the advantages of high precision, stable performance, high reliability, and easy to install.
It was widely used in clean workshop, biological medicine, food industry, laboratory and other clean space areas.
Technical index
The display range of the temperature: -99 to +999 degrees centigrade (the display resolution is 0.1; the range can be set by pressing the button within the display range, such as setting the range to 0~100 degrees centigrade)
The display range of the humidity: 0 to 100%RH (the display resolution is 0.1)
The measurement precision: 0.2%FS
Signal input: current input: 4 to 20mA
The input type of the power was 0 to 10V
Signal out: current out: 4 to 20mA, electric load no more than 500
The power output mode was 0 to 10V, and the electric load was more than 10K
(Note: when choosing the type, please pay attention to: first of all, the input signals of both sides should be the same. Both of them are 4 to 20mA, or both of them are 0 to 10V. Second, the signals of both sides must be the same. For example, if the input of both sides is 4 to 20mA, then the output must also be 4 to 20mA)
Response time: T90 no more than 10ms
Power supply: 20~28VDC
Degree of protection: IP5X
Working environment: temperature: -20 to +50 ° C, humidity: 0 to 85%RH
The storage environment: temperature: -20 to +60 degrees, humidity: 0 to 85%RH
The layout:
结构图（单位：mm）
Model selection form
Basic unit YGM410-
1 standard products 1
Customized x
2 (temperature, humidity) input (temperature, humidity) and output 4 to 20mA 01
0 to 10V 02
Note: when you choose a customized one, some of the technical data will not be the same as the original one. Please note it when you order.
It explained: 1. the temperature and humidity should be the same. Either 4 to 20mA, or 0 to 10V;
2. the signals of both sides must be the same. For example, if the two-way signal input was 4 to 20mA, then the output must be 4 to 20mA.
Order guide
YGM410-101
Standard products
(temperature, humidity) input (temperature, humidity) and output 4 to 20mA
It is stated that the company will continuously reform the products. If there is any change in the design or the standard, I reserve the right not to inform in advance.
