Product Overview
IN80 hot film wind speed sensor for clean environment is an ideal choice for measuring wind speed in the field of precise ventilation control. Based on the working principle of hot film type, the product can still maintain high accuracy even at low wind speed. The product has added an anti drift design. Factors such as temperature change and vibration will not affect the performance of the sensing element basically. The long-term stability of the product has been greatly improved, and its reliability is far higher than that of the traditional hot wire anemometer.
Main technical indicators
Measuring range: 0~20m/s
Accuracy: 0.2 ～ 20m/s ± (0.2m/s+5% * measured value) (at 20 ℃ and 1013hPa)
Signal output: current output type: 4 ～ 20mA (three wire system), electrical load ≤ 500 Ω
Voltage output type: 0 ～ 10V (three wire system), electrical load ≥ 10K Ω
485 output type: standard ModBus RTU
Power supply: 20~28VDC
Electrical connection: PG9, cable diameter 4~8mm
Enclosure protection grade: IP65
Working pressure: less than 1 Bar
Working temperature: - 20 ℃~+60 ℃
Storage environment: temperature - 20 ℃～+60 ℃, humidity 0 ～ 85% RH
Circuit connection

Installation dimension drawing

Model Selection Table