Product Overview
IN62 is a differential pressure transmitter specially designed for clean rooms. It adopts piezoresistive membrane MEMS sensor with high measurement accuracy and good long-term stability. The whole machine adopts embedded installation, which is basically flush with the wall, greatly reducing the dust attachment area. The panel adopts the stainless steel dust-free wiredrawing panel dedicated to the biological cleaning workshop, which meets the requirements of clean rooms, with a thickness of about 1mm, more in line with the requirements of clean rooms that are easy to clean and dust-free; At the same time, the infrared remote control is used to replace the traditional buttons for parameter setting, so that personnel can complete a series of operations without touching the product.
Main technical indicators
Range: - 500~+500Pa, customizable
Accuracy: ± 1% FS (within the range of lower range~- 3Pa and+3Pa~upper range, under normal temperature)
Signal output: current output type: 4~20mA (three wire system), electrical load ≤ 500 Ω
Voltage output type: 0~10V (three wire system), electrical load ≥ 10K Ω
485 output type: ModBus RTU
Pressure medium: air or non-conductive, non explosive gas
Response time: T90 ≤ 3s
Power supply: 20~28VDC or 24VAC
Working pressure: less than 1 Bar
Working environment: temperature 0~+50 ℃, humidity 0~85% RH
Storage environment: temperature: - 20~+60 ℃, humidity: 0~85% RH
Circuit wiring

Installation dimension drawing

Model Selection Table