1. Product Overview

YGM206 high temperature air speed transmitter is specially designed for air speed measurement in high temperature field. It adopts stainless steel high temperature probe rod and can measure the wind speed under the high temperature environment of 250 ℃ at most. The simple and efficient cooling strategy is adopted, so that the transmitter can measure high temperature gas while maintaining the cost advantage. It has an absolute price advantage when comparing the same type of products at home and abroad.




2. Technical parameters



Measuring range: 0 ～ 1/2/10/20/30/50 (m/s)

Accuracy: 0.2 ～ 1m/s ± (0.2m/s+3% * measured value)

0.2 ～ 2m/s ± (0.2m/s+3% * measured value)

0.2 ～ 30m/s ± (0.2m/s+3% * measured value)

0.2 ～ 40m/s ± (0.2m/s+3% * measured value)

0.2 ～ 50m/s ± (0.2m/s+3% * measured value) (at 20 ℃, 1013hPa)

Signal output: current output type: 4 ～ 20mA (three wire system); Electrical load ≤ 500 Ω

Voltage output type: 0 ～ 10V (three wire system); Electrical load ≥ 10k Ω

485 output type: standard ModBus RTU

Response time: T90 ≤ 3s

Power supply: 20~28VDC

Electrical connection: M16 × 1.5, cable diameter: 4-8mm

Enclosure protection grade: IP65 (when selecting display module, the protection grade is IP54)

Working pressure: less than 1 Bar

Working temperature: transmitter: - 40~+50 ℃

Probe rod: - 40 ～+80 ℃, - 40 ～+120 ℃, - 40 ～+160 ℃, - 40 ～+200 ℃, - 40 ～+250 ℃ (optional)



Storage environment: temperature: - 20~60 ℃, humidity: 0~85% RH

3. Circuit connection

5.选型表