Your location：
YGM205 is a transmitter capable of measuring high Air speed, with the maximum measuring Air speed of 50m/s. One or several pairs of sample gas acquisition holes are set on the probe rod, which can measure the wind speed at a single point or at multiple points; The probe rod has a certain anti pollution ability and can be used under worse working conditions. At the same time, the installation of the transmitter is very simple. The probe rod is fixed at the position of the measured air flow through the flange to obtain a stable signal output.
Application fields: textile industry, HVAC industry, electronic workshop, medical workshop, etc.
Main features: capable of measuring 50m/s high Air speed, two-way wind speed measurement, output calibration function, simple installation
Main technical indicators:
Measuring range: 0~30m/s, 0~40m/s, 0~50m/s
Accuracy: 0.2~30m/s ± (0.2m/s+3% * measured value)
0.2~40m/s ± (0.2m/s+3% * measured value)
0.2~50m/s ± (0.2m/s+3% * measured value) (at 20 ℃, 1013hPa)
Signal output: current output type: 4~20mA (three wire system), electrical load ≤ 500 Ω
Voltage output type: 0~10V (three wire system), electrical load ≥ 10K Ω
485 output type: standard ModBus RTU
Response time: T90 ≤ 3s
Power supply: 20~28VDC
Electrical connection: M16 × 1.5, cable diameter: 4-8mm
Length of probe rod: 100mm~500mm, customizable
Enclosure protection grade: IP65 (when selecting display module, the protection grade is IP54)
Maximum working pressure: 1 Bar
Working temperature: transmitter: - 40 ℃~+50 ℃
Probe rod: - 40~+60 ℃, - 40~+80 ℃, - 40~+120 ℃ (optional)
Storage environment: temperature: - 20~60 ℃, humidity: 0~85% RH
Wiring diagram:
Structural dimension drawing:
Model Selection Table
| Serial No |
Instrument specifications |
YGM205- | |||||||||
| 1 |
Confirmation of installation mode |
Integrated | 1 | ||||||||
| 2 |
Display and keys |
yes | L | ||||||||
| no | N | ||||||||||
| 3 |
Air direction selection |
one-way |
LD | ||||||||
|
two-way |
LB | ||||||||||
| 4 |
range |
0~30m/s | 30 | ||||||||
| 0~40m/s | 40 | ||||||||||
| 0~50m/s | 50 | ||||||||||
|
Special customization |
XX | ||||||||||
| 5 |
output |
4～20mA | 01 | ||||||||
| 0～10V | 02 | ||||||||||
| RS485 | 03 | ||||||||||
| 6 |
Medium temperature |
-40～+60℃ | 406 | ||||||||
| -40～+80℃ | 408 | ||||||||||
| -40～+120℃ | 412 | ||||||||||
| 7 |
Length of probe rod |
100mm | 10 | ||||||||
| 200mm | 20 | ||||||||||
| 400mm | 40 | ||||||||||
|
Special customization |
XX | ||||||||||
| 8 |
Number of sampling points |
1 | 1 | ||||||||
| 2 | 2 | ||||||||||
| 3 | 3 | ||||||||||
| 4 | 4 | ||||||||||
|
Special customization |
X | ||||||||||
Note: When special customization is selected, some technical parameters will also be inconsistent with the technical parameters in this book. Please make a special note when ordering.
1. The diameter of the probe rod is 14mm
2. When the Air speed range is specially customized, the maximum value shall not exceed 50m/s
3. When the length of the probe rod is specially customized, the maximum length shall not exceed 500mm
Ordering Instructions1. The diameter of the probe rod is 14mm
2. When the Air speed range is specially customized, the maximum value shall not exceed 50m/s
3. When the length of the probe rod is specially customized, the maximum length shall not exceed 500mm
| YGM205-1LLB3001406102 | ||||
|
Confirmation of installation mode |
Integrated | |||
| Display and keys | have | |||
| Air direction selection | two-way | |||
| range | 0～30m/s | |||
| output | 4~20mA | |||
| Medium temperature | -40～+60℃ | |||
| Length of probe rod | 100mm | |||
| Number of sampling points |
2 |
|||
